倍加福P+F EL2889

The EL2889 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2889. The power contacts are connected through. In the EL2889 the outputs are supplied via the 0 V DC power contact.

Special features:

ground switching

Connection of different load types possible (ohmic, inductive, lamp load)

Max. output current 0.5 A per channel

Overload and short-circuit proof outputs and reverse polarity protection

Tool-free connection by direct plug-in technology for solid wire conductors

Space-saving use in the control cabinet

Direct connection of multi-channel sensors in 1-wire connection technology in the smallest space

Increased packing density with 16 connection points in the housing of a 12 mm terminal block

EL2889數字輸出端子將來自自動化設備的二進制24 V DC控制信號連接到工藝級執行器，并進行電氣隔離。EtherCAT終端有16個信道，其信號狀態由LED指示。連接技術特別適用于單端輸入。所有部件必須使用與EL2889相同的參考點。電源觸點通過連接。在EL2889中，輸出通過0 V DC電源觸點提供。

特殊功能：

接地開關

可能連接不同負載類型（歐姆、電感、燈負載）

每個通道最大輸出電流0.5 A

過載和短路保護輸出和反極性保護

實心導線直接插入技術的無工具連接

控制柜節省空間

在最小空間內采用單線連接技術直接連接多通道傳感器

增加了12 mm接線盒外殼中16個連接點的包裝密度

倍加福P+F EL2889 文章出自長欣工控轉載請附上鏈接